NEVER WORRY ABOUT DRIFTING AGAIN WITH THE GRUFFTUFF BOX ANCHOR™!

MADE IN THE USA

Handmade in America with high quality 100% American A36 steel.

NO POWERING DOWN

The box anchor sets quickly within 1 foot, which means no more powering down!

BOAT PLACEMENT CONTROL

No more time wasted searching for the perfect spot. Anchor in nearly any bottom condition, giving you more time to relax.

NO LEAD CHAIN NEEDED

Unlike traditional anchors that require additional chain.

NO MORE DRIFTING & DRAGGING

Never worry about slowly drifting or dragging again. Get back to enjoying your day with a product that just works simply, easily and reliably.

2 TO 1 SCOPE

Which means that this anchor requires only half the rope length to set as compared to other anchor designs.

QUICKLY RESETS

During current changes the box anchor rolls over and automatically resets.

EASY RETRIEVAL

Pull the line in to bring the boat over the top of the anchor. The box anchor will pop right off the bottom.

GALVANIZED STEEL

Constructed with high quality A36 steel and hot dip galvanized to industrial standards, the best protection from corrosion. The same construction can be found on many bridges and buildings.

REPLACEABLE TEETH

Replaceable teeth allow for replacement or changing to alternative tooth styles.

SWITCH TO AN ANCHOR YOU CAN TRUST!

HOW IT WORKS

  • Attach a 2:1 scope of rope to your GruffTuff box anchor™. Scope is the ratio of water depth to the anchor line length. For instance, if the water you are putting your anchor in is 10 feet deep you will need to put 20 feet of rope on your anchor to have a 2:1 scope. Essentially, use twice as much rope as the water depth. No lead chain is required. (When purchasing rope we typically recommend purchasing 100 feet of 1/2 inch rope, but this may vary based on your boat size and water depth).
  • Turn off your boat, toss the anchor overboard (bow or stern, doesn’t matter). The box anchor will hit the bottom, roll to its side and set within 1 foot. There’s no need to power down. The box anchor holds your boat at up to a 45-degree angle from the bottom, digging the downward facing teeth firmly into the bottom without snagging them permanently on debris. In heavy seas allowing more anchor line out will increase the holding power of the anchor.
  • Retrieving it is easy. Pull the line in to bring the boat over the top of the anchor. The lack of upward facing surface area will allow the box anchor to pop right off the bottom.
  • This same principal works in wind or current change. The new wind direction brings the boat over the top of the anchor, freeing it from the bottom. But as the boat passes over the top of the anchor and continues towards its new resting place, the box anchor simply rolls over on its other side to set firmly in the new direction. With a traditional anchor the wind changes causing you to have to power up the boat, retrieve the anchor and try to reset it. The box anchor eliminates that nuisance.

MADE IN THE USA

The GruffTuff Box Anchor™, ultimate holding power.